Sistema PF Keep® includes: 

• PF KEEP® 2.0 press
• D-WAXING PRO dewaxing oven
• 90 g of Peek (2 containers of 45 g each)
• 10 PF KEEP® coatings (powder and liquid)
• 10 Lithium YZR® tablets.
• 10 Lithium YZR® coatings (powder and liquid)
• Lithium YZR® polishing kit
• Lithium YZR® diamond paste
• 1 silicone cup 100 g, 200 g and 500 g
• 3 EZ MODELING® resin syringes
• 6 x 500g rods - 10 x 100g rods
• 1 x 400-500g base - 1 x 200g base
• 1 x 100g base
• PF KEEP® key
• Lithium YZR® key

1.- A half arch is made with a TORONTO-type bar. To restore this bar, the three anterior teeth are selected, injected with lithium disilicate (LITHIUM YZR® LTA1) and coated with Kit colour glaze. The bar is reinforced with pink Signum Ceramics and characterised with Signum Matrix. The three teeth are cemented with Relay U200 resin cement.

2.- A half-arch telescopic bar is made, adjusted, polished and buffed, and two vertical attachments are provided.

3.- A Dolder-type bar with two vertical attachments is made. This bar is restored with a full lower denture.

-Each student receives a plaster model using the All on Four technique, which consists of four metal platforms and four titanium attachments.
- Working materials

*Hours: 10:00 AM to 6:00 PM
Check dates with your advisor.

¿What is PF KEEP®?

PF KEEP® is a polyether ether ketone-based polymer commonly known as ‘PEEK’. It is a biocompatible material that has been extensively tested in the medical industry.

PF KEEP® provides an innovative metal-free solution that meets patient comfort and durability needs and is useful for manufacturing: crowns, bridges, endoposts, precision attachments, removable bridges, dentures and, most surprisingly and innovatively, attachments for implants, whether single or full bars in the form of monolithic restorations.

Properties:

1.-Metal-free.
2.-Leaves no taste.
3.-Ultra-lightweight.
4.-Very low thermal conductivity.
5.-Highly resistant to fracture.
6.-Biocompatible.
7.-Compatible with adhesive techniques for both ceromers and Lithium YZR®.
8.-For permanent use.
9.-Easy to wear and polish.
10.-No special furnaces required.

*Course only, includes:

- Creation of a Dolder Bar + Toronto Bar.
- Work materials
- Course cost: $18,000 Mexican pesos (the course is free with the purchase of the system)
*Hours: 9 a.m. to 6 p.m.

CLEMDE®